HOW TO SAMSUNG GALAXY J2 PRIME TWRP (G532G G532M G532F)

hOW sAMSUNG gALAXY j2 PRIME ROOT NO DEAD RISK
BODY Dimensions 144.8 x 72.1 x 8.9 mm (5.70 x 2.84 x 0.35 in)
SOUND Alert types Vibration; MP3, WAV ringtones
Loudspeaker Yes
3.5mm jack Yes
COMMS WLAN Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Weight 160 g (5.64 oz)
SIM Single SIM (Micro-SIM) or Dual SIM (Micro-SIM, dual stand-by)
DISPLAY Type PLS TFT capacitive touchscreen, 16M colors
Size 5.0 inches (~66.0% screen-to-body ratio)
Resolution 540 x 960 pixels (~220 ppi pixel density)
Multitouch Yes
CAMERA Primary 8 MP, f/2.2, autofocus, LED flash
Features Geo-tagging, touch focus, face detection
Video 720p@30fps
Secondary 5 MP, f/2.2, LED flash
Bluetooth 4.2, A2DP, LE
GPS Yes, with A-GPS, GLONASS
Radio FM radio, RDS, recording
USB microUSB 2.0, USB On-The-Go
NETWORK Technology
GSM / HSPA / LTE
LAUNCH Announced 2016, November
Status Available. Released 2016, November
PLATFORM OS Android 6.0 (Marshmallow)
Chipset Mediatek MT6737T
CPU Quad-core 1.4 GHz Cortex-A53
GPU Mali-T720MP2
MEMORY Card slot microSD, up to 256 GB (dedicated slot) – single SIM
microSD, up to 256 GB (uses SIM 2 slot) – dual SIM
Internal 8 GB, 1.5 GB RAM
THEN READ

How To Root Samsung J2 Prime

Frist Download. Flash Tool,Samsung Driver, TWRP ,SuperSU

1 : Download Flash Tool Link .  Odin3_v3.12.5 Download

2 : Download Driver Samsung Kies 

3 : Download  TWRP 

4 : Download SuperSU

Next 

Enable Developer Option

Go to Settings>>About Phone>>
Then tap ‘Build number’ 7 times or until you get the message ‘You’re now a developer!’
Go back to Settings, choose ‘Developer options’. Find the ‘USB debugging’ option and enable it.
In the ‘Developer Option’ you will also find the ‘OEM Unlocking’ option, just enable it.
Make sure you don’t have Factory Reset Protection enabled in your Google account or you may never be able to boot again!

Install Samsung  Driver

Install the Samsung Driver Restart your PC, then Connect your Galaxy J7 2016 Device with USB cable. It will configure driver automatically Connected Device.

 Install TWRP And Recovery

Run as Administrator the Odin3.exe file
Click on Option and disable Auto Reboot

Now click on AP and browse twrp-3.0.2-0-j7xelte.tar

Now switch on your Samsung Galaxy J7
Then Press and hold the Power + Volume Down + Home button simultaneously until its screen off and boot into a blue screen showing Warning

Now press Volume UP button to Continue…It will show

Now connect your Phone to PC via USB Cable
You will see that first box under ID:COM in odin is shaded mean driver properly installed

Now click on the Start button on Odin
It will few seconds, once its done, you will see green Pass

Once the flash done, you can pull the battery then place the battery back in.
Now hold [Volume Up] + [Home] + [Power] buttons until you reach TWRP recovery mode. If you end up in stock recovery, start again from step 1
Now it will ask for allowing modification, just swipe to allow otherwise the OS will replace TWRP once you boot!
Now go to Wipe -> Advanced Wipe -> Format Data -> yes (you need to type yes)
For safety make a backup of current ROM ( Google it if you have no idea)
Now tap on [Reboot] and select [Recovery]
It will reboot to TWRP Recovery
Now connect your phone to PC and transfer the UPDATE-SuperSU-v2.76-20160630161323.zip to phone
Now tap on Install and browse the UPDATE-SuperSU-v2.76-20160630161323.zip file
Once you find the UPDATE-SuperSU-v2.76-20160630161323.zip file just tap on it
Now swipe to confirm flash
Once the flashing process done, you will get successful message
Now [Reboot] -> [System]
Your Samsung Galaxy J2 Prime has been rooted.